Star Wars-General Kenobi 1/6 Scale Resin Model Fan Art

Description

From the Clone Wars come a 3D resin printed model of General Kenobi.
The details on the model are outstanding from the face that is spot on of Ewan Mcgregor to the textures of the fabric and the armor .
The model was printed on a 4K machine to make sure all the details popped.The base was printed in filament .
The hand/saber was done in a translucent blue just in case someone would like to light it up,you can use the drain holes to wire it through.
This is an excellent model and a great size at 1/6 scale that will look great in any collector and fan of Star Wars.
This is a limited issue model
Disclaimer
:
This is a 3D resin print. It will have like all materials in making models slight imperfections. These imperfections does not mar the model in anyway and with the knowledge of modeling can be worked out of the kit.
A big percentage of the models are hollowed out, that are what the drain holes are for and some pieces can be solid also. The drain holes can be puttied in and sanded to match.
The models are printed no less than 2mm walls so they are thick
All models go thru a post-production process with sanding and using fillers for any defect that can be found, sometimes they can get over looked. I try to put in your hands a model that is ready to prime and paint.
Color of resin and filament may vary
Anytime you want a tighter fit, the resin part can be heated up with hot water or a hair dryer and it will make it easier to take a better shape. Just don’t overdo it.
Working with FDM
Filament is a plastic substance that prints in lines and build up the 3D print. In order to fill some of the visible lines, a filler needs to be used, like wood filler or any Substitute primed and Sanded. I have heard that Badger makes a 2 part primer that works very well and from Smooth On a product called XTC which is an epoxie overlay.
If you are not comfortable going through these steps, maybe this model is not for you.