Star Wars YT-2400 Outrider 1/72nd scale model kit 3d printed pla

Description

This item is a 3D printed version of the YT-2400 Outrider from the Star Wars Shadows of the Empire video game. It is not 100% game accurate. This is a kit item, meaning that you will receive the parts straight off of the 3D printer, and will have to assemble and do all of the finishing touches yourself.
DO NOT put PLA printed models in the sun or they will warp or even melt. Even if painted.
--TERMS--
3D printed props and prop kits are sold with a zero return, zero refund policy. 3d printed items, even finished items, will have small imperfections, period. Photos show you exactly what you're getting and please understand that while fairly durable, these props are meant as display items, and can be scratched or broken if mishandled. Any 3d works that require attribution by license are shipped with a small tag, naming the original designer.
Kits may come in colors other than what is pictured. They are printed using whatever color filament we have on hand at the time.
I recommend using 5 minute epoxy to glue the ship together, so you will have plenty of time to align the pieces. I did make alignment pegs for this kit and they work well but I still recommend 2 part epoxy.
Also I recommend using a good 2 in 1 filler and primer in very light coats and then wet sanding with fine grip sandpaper and repeat until you get the smooth finish you want.
This model needed support to print in several areas and will be rough in those areas. I recommend light sanding with various grit paper.
It comes with the 2 body hull pieces, cockpit (Comes already glued together and ready to connect to the body), 3 long pegs to join the body, 2 guns for top and bottom (guns are friction fit and rotate. The guns are printed
vertically and the barrels can snap if not carful
), 2 bases and 2 base posts. There are no landing gear so I made the stand for an inflight or takeoff look.
This ship is intended to be in 1/72nd, in scale with Fine Molds & Bandai's 1/72nd Millennium Falcon, Fine Molds is in the picture.
It is printed in PLA at 0.2mm layer height.
The bandia 1/72 figure and the fine molds millennium falcon is not included, the figure and ship is used for scale.