Star Wars 1/2256 Mon Calamari MC-80 Liberty Cruiser 3d printed PLA

Description

This item is a 3D printed version of the Star Wars Mon Calamari MC-80 Cruiser in 1/2256 scale. It is not screen accurate. This is a kit item, meaning that you will receive the parts straight off of the 3D printer, and will have to assemble and do all of the finishing touches yourself.
DO NOT put PLA printed models in the sun or they will warp or even melt. Even if painted.
--TERMS--
3D printed props and prop kits are sold with a zero return, zero refund policy. 3d printed items, even finished items, will have small imperfections, period. Photos show you exactly what you're getting and please understand that while fairly durable, these props are meant as display items, and can be scratched or broken if mishandled. Any 3d works that require attribution by license are shipped with a small tag, naming the original designer.
Kits may come in colors other than what is pictured. They are printed using whatever color filament I have on hand at the time.
I recommend using 5 minute epoxy to glue the ship together, so you will have plenty of time to align the pieces. Sand down the seams.
Also I recommend using a good 2 in 1 filler and primer spray paint in very light coats and then wet sanding with fine grip sandpaper and repeat until you get the smooth finish you want.
This ship is intended to be 1/2256 scale and is 21 inches long.
It is printed in PLA at 0.2mm layer height.
The kit comes with 3 main hull parts, 10 engine thrusters (please refer to picture for placement or contact me via ebay, most of the engines fit loosely but a few may be a little tight), and 4 parts that make up a base stand.
The Home One is for sale here (https://www.ebay.com/itm/284252825795)