(100-Pair) P310 PORTA SYSTEMS STUBLESS CENTRAL OFFICE TERMINAL CONNECTOR BLOCKS

Description

MAKE OFFER!
(100-Pair) P310 PORTA SYSTEMS TERMINAL CONNECTOR BLOCKS-STUBLESS CENTRAL OFFICE
The P310 is a 100-pair protector/connector block that utilizes wire-wrap terminations and industry standard 5-pin protector modules arranged in two 5x10 arrays. The P310 protects personnel and expensive equipment from damaging electrical surges that may get onto incoming cable lines. The unit has a compact design with straight or angled mounting options. Custom swivel stub permits field changes between stub up and down.
Auction is for (1) unit. 42 units available. These units are NOT wired, they come stubless.
MAKE OFFER!
SPECIFICATIONS
Operating Temperature-13 ̊F to 149 ̊F (-25 ̊C to 65 ̊C)
Meets or exceeds specifications Listed to UL 497 and those set forth in Telcordia GR-2916 and Telcordia TA-EOP-000164
Dimensions (height x width x depth) 9.3” x 3.5” x 10” (23.7 cm x 8.9 cm x 25.4 cm)
The P310 is a 100-pair protector/connector block that utilizes wire-wrap terminations and industry standard 5-pin protector modules arranged in two 5x10 arrays. The P310 protects personnel and expensive equipment from damaging electrical surges that may get onto incoming cable lines. The unit has a compact design with straight or angled mounting options. Custom swivel stub permits field changes between stub up and down.
CPE, Premise Wiring, Headend, CO Utility, Municipality,
For use on central office or distribution frames
Accepts industry standard 5-Pin protector modules
Compact, lightweight design saves space and increases number of protected pairs per frame vertical
Gold plated protector module sockets and test field contacts for superior electrical contact eliminating noise problems.
Fanning strips allow easy wire management for both field stubbing and cross connection to horizontal blocks
100-pair front-facing test field
Front ground test point offers labor savings and reliability
Custom connectorization available
Compatable-Commscope Systimax, Circa, Emerson Marconi, Tii Network Technologies tiitech.com: 26100-ST-MST, 190A1-100, 1900A1-100, 25100-110-M110C, 1880ENA1/NSC-100, BEPNCT100T, 25100-66-M66C, 1890ECT1/NSC-100, BEPNCC100C, 25100-ST-M110C, 489ACC1-100, 1880B1-100, BEPT100SC25, 25100-ST-M66C, 489BCC1-100, 1890BC1-100, BEPC100SC25, 26100-ST-MST, 190A1-100, 1900A1-100, R13410012, 24100-110-M110C, 489ACA1-100, 1880ECA1-100, BEPT100T, 24100-66-M66C, 489BCB1-100, 1890ECT1-100, BEPC100C, QCM486
COMMUNICATIONS BACKBONE CABLING271300-1SECTION 271300-COMMUNICATIONS BACKBONE CABLINGPART 1 -GENERAL1.1RELATED DOCUMENTS A. Drawings  and  general  provisions  of  the  Contract,  including  General  and  Supplementary Conditions and Division01 Specification Sections, apply to this Section. B. BICSI Telecommunications Distribution Methods Manual (TDMM), Eleventh Edition.1.2SUMMARYA.Section Includes:1.Pathways.2.UTP cable.3.Cable connecting hardware, patch panels, and cross-connects.4.Cabling identification products. B. Related Sections:1.Section280513 "Conductors and Cables for Electronic Safety and Security" for voice and data cabling associated with system panels and devices. 1.  3DEFINITIONSA.BICSI:   A  professional  association  supporting  the  information  technology  systems  (ITS) industry. B. Cross-Connect:  A facility enabling the termination of cable elements and their interconnection or cross-connection. C. EMI:  Electromagnetic interference. D. IDC:  Insulation displacement connector. E. LAN:  Local area network. F. RCDD:  Registered Communications Distribution Designer. G. UTP:  Unshielded twisted pair. protector modules Blocks Frame Central Office 100 Pair Stubless 100 Pair Wire-Wrap Connector Block
COMMUNICATIONS BACKBONE CABLING271300-21.4BACKBONE CABLING DESCRIPTIONA. Backbone  cabling  system  shall  provide  interconnections  between  communications  equipment rooms,  main  terminal  space,  and  entrance facilities  in  the  telecommunications  cabling  system structure.    Cabling  system  consists  of  backbone  cables,  intermediate  and  main  cross-connects, mechanical  terminations,  and  patch  cords  or  jumpers  used  for  backbone-to-backbone  cross-connection. B. Backbone  cabling  cross-connects  may  be  located  in  communications  equipment  rooms  or  at entrance facilities.  Bridged taps and splitters shall not be used as part of backbone cabling.
OUTSIDE TELEPHONE FEEDER CABLEA. Outside telephone feeder cable shall be a multi-twisted pair copper cable, gel filled, with coated aluminum shield and outer plastic jacket suitable for underground service.  The cable shall have the following characteristics:1.Cable shall meet Rural Utilities Services (RUS) Specification PE-89.2.Conductors  shall  be  solid,  24  gauge,  annealed  copper.    Strands  shall  be  individually insulated, polyethylene insulated cable (PIC) and twisted into pairs.3.Number of pairs in cable shall be noted for each job.4.Individual conductors shall be color coded per telephone industry practice.5.A  petroleum  gel  shall  be  used  to  fill  all  voids  and  indices  to  prevent  the intrusion  of moisture.6. A  coated  aluminum  shield  shall  encase  the  cable  and  be  flooded  with  petroleum  jelly.  The shield shall be continuous throughout the length of the cable.7.The  cable  shall  have  an  overall  PVC  jacket/sheath.    The  jacket/sheath  shall  be  abrasion resistant, impervious to light or water.
COMMUNICATIONS BACKBONE CABLING271300-7A.Building Entrance Protectors1.All  building  protectors  shall  be  AVAYA  489-Type  or  Circa  189  Type  (or  4486  Type where  specified)  protection  systems.   Project  will  be  responsible  for  matching  protector types in existing buildings (P310-Type where specified).  Pair count will be specified on a  per  job  basis.   Building  protectors  shall  be  STUB  IN  and STUBOUT  type. Building protectors must conform to UL 497 Specifications.a.P310 is the type of protectors used in the FREY Building and in David Boyd Hall.1)Porta Systems Products by tii Network Technologies.  2)Part number is P310-WW-24-XX (where XX is length of cable stub in feet)3)Or approved equal. B. Building Protector Modules1.Protector  modules  shall  be  Avaya  Type  3B1EW  or  Circa  C3B1E  gas  tube  with  sneak protection.  They shall be interchangeable 5-pin plug-in modules.